Request an assessment
Technician in hi-vis measuring a fire door gap with a digital gauge while holding a clipboard

Twickenham

Fire door inspection in Twickenham

Send details of the doors that need checking and a specialist firm will explain what is involved. There is no charge for the initial conversation, so you can find out exactly what needs doing before committing to anything.

Send an enquiry How it works

Fire safety services around Twickenham

A managing agent or inspector often flags doors during a wider review. The specialist firms handling enquiries here cover the full range of fire risk management work across Twickenham and nearby areas.

  • Technician using a gauge and clipboard to inspect a fire door, with a UK street visible through the window

    Fire Risk Assessment

    The specialist surveys the building, identifies hazards and produces a written record of findings along with actions to reduce risk.

  • Worker in hi-vis vest kneeling to check a fire door with a measuring tool

    Compartmentation Survey

    The specialist checks walls, floors and ceilings to confirm they form continuous barriers that stop fire and smoke spreading between rooms.

  • Man measuring the base of a grey fire door with a tape measure

    Fire Strategy

    The specialist reviews escape routes, alarm systems and structural protection to produce a written plan covering the whole building.

  • Man kneeling in a hallway using a gauge on a fire door edge

    HMO Fire Risk Assessment

    The specialist assesses shared houses and flats to meet licensing conditions, checking alarms, escape routes and fire separation.

What the signs on a door mean

A gap at the bottom of a door might be normal clearance or a failure. The same mark means different things depending on the frame, the hinges and the seals fitted. A specialist reads these signs together.

Inspector kneeling on a kitchen counter checking a smoke alarm with a torch and tablet.
Daylight showing under the bottom edge
The threshold gap exceeds the permitted limit, allowing smoke through. Measuring it against the manufacturer specification settles whether adjustment or a new seal is needed.
Door slams shut instead of clicking closed
The closer arm is misadjusted or the wrong size for the leaf weight. Testing the closing force and latching sequence shows if recalibration fixes it.
Painted-over strip around the frame edge
Intumescent material sealed under paint may not expand when heated. Scraping back a small section reveals whether the strip is intact or missing entirely.
Cracked pane in the vision panel
The specialist checks the etched mark on the glass to confirm its rating and whether it needs replacing.

What you receive after the check

The specialist records each door individually, measuring gaps, testing hardware and noting defects. You get a written document that sets out what was found and what action is needed, backed by evidence rather than opinion.

Worker kneeling by a fire door using a tablet while a colleague holds a clipboard near an extinguisher
Written inspection report
A record of every door checked, listing faults, measurements and photographs taken during the visit.
Action schedule
A clear list of repairs or replacements required, ordered by priority so you know what to address first.
Evidence file
Photographs and measurements compiled into a single document suitable for sending to a managing agent or council.

Questions about door inspections

These are the things people ask most often. Send an enquiry for anything not covered here. Ask a question.

My managing agent has flagged the flat entrance doors, what happens now?
The specialist arranges a visit to inspect each flagged flat entrance door. They measure gaps, test closers and check intumescent strips. You then receive a written report detailing any faults and the specific remedial work required to satisfy the agent.
How many of the doors in my block need inspecting and how is that decided?
Under the Fire Safety England Regulations 2022, buildings over 11 metres require annual checks on all flat entrance doors and quarterly checks on communal doors. For smaller blocks, the responsible person decides based on the fire risk assessment.
What are you checking on gaps, strips and closers?
The specialist measures the gap around the entire leaf to ensure it stays within 3mm to 4mm limits. They verify that intumescent and cold smoke seals are present and undamaged, and test the closer to confirm the door shuts fully into the frame every time.
Do you provide a certificate or evidence I can send to the agent?
Yes. The specialist produces a detailed report that serves as a fire door certificate for a landlord or managing agent. It includes photographs, measurements and a pass or fail status for each door, which you can forward directly.
Can you inspect doors in an occupied HMO without disturbing tenants?
A fire door survey for an HMO can be scheduled room by room at agreed times. The specialist coordinates access with tenants or the landlord to keep disruption minimal while still completing a thorough check of every required door.
What does a fire door inspection cost per door in Twickenham?
Pricing depends on the total number of doors and the building type. Once the specialist knows the scope, they provide a fixed quote covering the full visit and the written report, so there are no unexpected charges later.
If a door fails, can it be adjusted or does it need replacing?
Many failures come from worn hinges, misaligned closers or damaged seals, which the specialist can note for straightforward repair. A full replacement is only necessary when the door leaf itself is warped, heavily damaged or lacks the correct fire rating.
How quickly can you attend and when would I get the report?
The specialist typically arranges a site visit within a few working days of receiving the enquiry. The completed report follows shortly after the inspection, usually within five working days, ready for submission to your agent or authority.

How the inspection works

  1. 1

    Send the details

    You describe the building and the doors that need checking. The specialist uses this to confirm the scope and arrange a date.

  2. 2

    The site visit

    The specialist inspects each door on site, measuring gaps, testing hardware and photographing any faults found.

  3. 3

    Receive the report

    You get a written document setting out the condition of every door and the actions required to bring them up to standard.

Areas covered around Twickenham

Enquiries are handled for homes and blocks throughout Twickenham. Specialist firms also carry out fire door checks in neighbouring towns where managing agents and landlords request them regularly.

If your street is outside these areas, send an enquiry to check availability.

Get the doors checked

Describe the building and the doors that have been flagged. The specialist reviews the details and explains what the inspection involves. Sending an enquiry does not commit you to booking anything.

  • No obligation to book
  • Clear pricing upfront
  • Local specialists

These details are passed to a specialist, as the privacy page describes.

The privacy notice has more on what happens to the information you send, the specialist may pay Twickenhamfire when we pass the enquiry to them, you are charged nothing at all, and one independent fire safety specialist receives your details. You may still gather quotations elsewhere.

Or send an email to hello@twickenhamfire.co.uk